Publications

HOME     Publications
Articles in  Journals
Environmental & Aeroacousitcs Solutions
  • Younsi, M., Djerrada, A., Belamri, T. and Menter, F., “Application of the SAS turbulence model to predict the unsteady flow field behaviour in a forward centrifugal fan”, International Journal of Computational Fluid Dynamics, Vol. 22, N°9, pp 639,648 – 2008.
  • Mejri, I., Bakir F., Rey, R. and Belamri, T. “Comparaison of computational results obtained from a homogeneous cavitation model with experimental investigations of three inducers” , ASME Journal of Fluids Engineering, 128, 1308, 2006.
  • Bakir, F., Rey, R., Gerber, A.G., Belamri,T. and Hutchinson, B. “Numerical and experimental investigations of the cavitating behavior of an inducer”, International Journal of Rotating Machinery, 10 , pp.15-25, 2004.
  • Belamri, T., Bakir, F., Rouibi, M. and Rey, R., “Vortex surface method: Some numerical problems of the potential calculation”, International Journal for Numerical methods in Fluids, Vol. 36, 2001, pp. 867-884.
  • Belamri, T., Bakir, F. and Rey, R., “On a general method of unsteady potential calculation applied to the compression turbomachine stages – Part I: Theoretical Approach”, Journal of Fluid Engineering, Vol. 123, 2001, pp. 780-786.
  • Belamri, T., Bakir, F. and Rey, R., “On a general method of unsteady potential calculation applied to the compression turbomachine stages – Part II: Experimental Comparison”, Journal of Fluid Engineering, Vol. 123, 2001, pp. 787-792.
  • Belamri, T., Bakir, F. and Rey, R., “Numerical stability conditions in the calculation of potential velocity fields”, AIAA Journal, Vol. 37, No 2, 1999, pp. 272-276.
  • Bakir, F., Belamri, T., Kouidri, S. and Rey, R., “Theoretical and experimental study of the blade to blade flow in a centrifugal pump”, International Journal of Turbo & Jet-Engines, Vol. 15, No 4, 1998, pp 275-291.
  • Bakir, F., Belamri, T., Kouidri, S. and Rey, R., “Theoretical and experimental study of the pressure fluctuation due the movement of an axial compression stage”, Problemes Multidiscplinaires dans les Turbomachines, French Society of Mechanics, No 4, 1998, pp 274-291.
 Mechanical Solutions
  • H. Bougherara, M. Bureau, M. Campbell, A. Vadean and L. Yahia, “Design of a biomimetic polymer-composite hip prosthesis,” Journal of Biomedical Materials Research – Part A, vol. 82, pp. 27-40, 2007.
  • H. Bougherara, M. Bureau, M. Campbell, A. Vadean and L. Yahia, “Design of a biomimetic polymer-composite hip prosthesis,” Journal of Biomedical Materials Research – Part A, vol. 82, pp. 27-40, 2007.
  • H. Bougherara, M. N. Bureau and L. Yahia, “Bone remodeling in a new biomimetic polymer-composite hip stem,” Journal of Biomedical Materials Research – Part A, vol. 92, pp. 164-174, 2010.
  • H. Bougherara, V. Klika, F. Maršík, I. A. Marík and L. Yahia, “New predictive model for monitoring bone remodeling,” Journal of Biomedical Materials Research – Part A, vol. 95, pp. 9-24, 2010.
  • H. Bougherara, E. Rahim, S. Shah, A. Dubov, E. H. Schemitsch and R. Zdero, “A preliminary biomechanical assessment of a polymer composite hip implant using an infrared thermography technique validated by strain gage measurements,” J. Biomech. Eng., vol. 133, 2011.
  • H. Bougherara, R. Zdero, A. Dubov, S. Shah, S. Khurshid and E. H. Schemitsch, “A preliminary biomechanical study of a novel carbon-fibre hip implant versus standard metallic hip implants,” Medical Engineering and Physics, vol. 33, pp. 121-128, 2011.
  • H. Bougherara, R. Zdero, Z. Mahboob, A. Dubov, S. Shah and E. H. Schemitsch, “The biomechanics of a validated finite element model of stress shielding in a novel hybrid total knee replacement,” Proc. Inst. Mech. Eng. Part H J. Eng. Med., vol. 224, pp. 1209-1219, 2010.
  • H. Bougherara, R. Zdero, M. Miric, S. Shah, M. Hardisty, P. Zalzal and E. H. Schemitsch, “The biomechanics of the T2 femoral nailing system: A comparison of synthetic femurs with finite element analysis,” Proc. Inst. Mech. Eng. Part H J. Eng. Med., vol. 223, pp. 303-314, 2009.
  • M. Campbell, H. A. Bougherara, L. Yahia, M. N. Bureau, J. -. Legoux and J. Denault, “Biomimetic polymer composites for orthopedic hip implants,” in Medical Device Materials III – Proceedings of the Materials and Processes for Medical Devices Conference 2005, 2006, pp. 49-54.
  • M. Campbell, M. N. Bureau and L. Yahia, “Performance of CF/PA12 composite femoral stems,” J. Mater. Sci. Mater. Med., vol. 19, pp. 683-693, 2008.
  • M. Campbell, M. N. Bureau and L. Yahia, “Performance of CF/PA12 composite femoral stems,” J. Mater. Sci. Mater. Med., vol. 19, pp. 683-693, 2008.
  • M. Crookshank, J. Coquim, M. Olsen, E. H. Schemitsch, H. Bougherara and R. Zdero, “Biomechanical measurements of axial crush injury to the distal condyles of human and synthetic femurs,” Proc. Inst. Mech. Eng. Part H J. Eng. Med., vol. 226, pp. 320-329, 2012.
  • I. El Sawi, P. A. Olivier, P. Demont and H. Bougherara, “Investigation of the effect of double-walled carbon nanotubes on the curing reaction kinetics and shear flow of an epoxy resin,” J Appl Polym Sci, vol. 126, pp. 358-366, 2012.
  • B. Nicayenzi, S. Shah, E. H. Schemitsch, H. Bougherara and R. Zdero, “The biomechanical effect of changes in cancellous bone density on synthetic femur behaviour,” Proc. Inst. Mech. Eng. Part H J. Eng. Med., vol. 225, pp. 1050-1060, 2011.
  • A. Sayyidmousavi and H. Bougherara, “Investigation of stress shielding around the Stryker Omnifit and Exeter periprosthetic hip implants using an irreversible thermodynamic-based model,” Journal of Biomedical Materials Research – Part B Applied Biomaterials, vol. 100 B, pp. 1416-1424, 2012.
  • S. Shah, H. Bougherara, E. H. Schemitsch and R. Zdero, “Biomechanical stress maps of an artificial femur obtained using a new infrared thermography technique validated by strain gages,” Medical Engineering and Physics, 2012.
  • R. Zdero, H. Bougherara, A. Dubov, S. Shah, P. Zalzal, A. Mahfud and E. H. Schemitsch, “The effect of cortex thickness on intact femur biomechanics: A comparison of finite element analysis with synthetic femurs,” Proc. Inst. Mech. Eng. Part H J. Eng. Med., vol. 224, pp. 831-840, 2010.
  • R. Zdero, M. Olsen, H. Bougherara and E. H. Schemitsch, “Cancellous bone screw purchase: A comparison of synthetic femurs, human femurs, and finite element analysis,” Proc. Inst. Mech. Eng. Part H J. Eng. Med., vol. 222, pp. 1175-1183, 2008.
  • R. Zdero, S. Shah, M. Mosli, H. Bougherara and E. H. Schemitsch, “The effect of the screw pull-out rate on cortical screw purchase in unreamed and reamed synthetic long bones,” Proc. Inst. Mech. Eng. Part H J. Eng. Med., vol. 224, pp. 503-513, 2010.
 Papers at Refereed Conferences
  • Belamri, T. and Wilson, S., “CFD coupled with structural analysis of a radial compressor”, ASME FED Summer Meeting, August, 2-5, 2009, Colorado, CO, FEDSM2009-78115.
  • Belamri, T., Younsi, M., Bakir, F. and Menter, F., “CFD Simulations of the Unsteady Flow and the Aeroacoustic Noise Generated by a Centrifugal Fan”, 12th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery – February, 12-22, 2008, Honolulu, Hawaii.
  • Belamri, T., Menter, F., and Egorov, Y., “CFD simulations of the aeroacoustic noise generated by a side view mirror”, 13th AIAA/CEAS Aeroacousics Conference, 2007, Rome, Italy, AIAA-2007-3568.
  • Belamri, T., Menter, F., and Egorov, Y., “CFD simulations of the aeroacoustic noise generated by a flow cavity”, ASME FED Summer Meeting, July, 17-20, 2006, Miami, FL, FEDSM2006-77424
  • Belamri, T., Kouidri, S., Fedala, D. and Rey, R., “Comparative study of the aeroacoustic behavior of two axial flow fans with different sweep angle”, ASME FED Summer Meeting, June, 16-23, 2005, Houston, TX, FEDSM2005-77424.
  • Belamri, T., Galpin, P., Braune, A. and Cornelius, C., “CFD simulation of 15 stage axial compressor – Part I: Method”, ASME Turbo Expo, June, 6-9, 2005, Reno, TG2005-68261.
  • Belamri, T., Galpin, P., Braune, A. and Cornelius, C., “CFD simulation of 15 stage axial compressor – Part II: results”, ASME Turbo Expo, June, 6-9, 2005, Reno, TG2005-68262.
  • Mejri, I., Bakir F., Rey, R. and Belamri, T., “Comparaison of computational results obtained from a vof cavitation model with experimental investigations of three inducers: Part I – Experimental investigations” ASME FED Summer Meeting, June 19-23, 2005, Houston, Texas, USA – FEDSM2005-77084.
  • Mejri, I., Bakir F., Rey, R. and Belamri, T., “Comparaison of computational results obtained from a vof cavitation model with experimental investigations of three inducers : Part II – Numerical Analysis” ASME FED Summer Meeting, June 19-23, 2005, Houston, Texas, USA – FEDSM2005-77284.